Infocus 10SB User Manual

— 1 — EC 10SB (SL) EC 12MODELINSTRUCTION MANUAL AND SAFETY INSTRUCTIONS FOR AIR COMPRESSOREC 10SB(SL) EC 12WARNINGImproper

— 10 —Fig. 53. Shutdown(1) Push the knob of the pressure switch to “OFF”(Refer to Fig. 1 and Fig. 2).(2) Unplug the plug from power source.(3) Open t

— 11 —Fig. 8Pour oil into the hole of the dipstick.To the level indicated on the dipstick (Refer to Fig.4).For oil replacement, follow the table below

— 12 —

— 13 —ItemNo. Code No. Part Name Q’ty Reference No.1 Joint 1 70840800002 Screw 4 70112200003 Screw 1 70143000004 Washer 1 70307800005 Head 1 757055000

— 14 —

— 15 —ItemNo. Code No. Part Name Q’ty Reference No.1 Screw 1 70120100002 Intake filter 1 72104300003 Filtering element 1 72100100004 Filter plate 1 74

— 16 —

— 17 —

312Code No. C99128411Printed in ItalyHitachi Koki Co., Ltd.

— 2 —— CONTENTS —PageIMPORTANT INFORMATION ...2MEANINGS OF SIGNAL WORDS ...2SAFETYIMPORTANT SAFETY IN

— 3 —SAFETYIMPORTANT SAFETY INSTRUCTIONSFOR USE OF THE COMPRESSORWARNING:Death or serious bodily injury could result from improper or unsafe use of co

— 4 —16. CHECK DAMAGED PARTS AND AIR LEAK.Before further use of the compressor, a guard orother part is damaged should be carefully checked todetermin

— 5 —33. THE SAFETY VALVE MUST WORK PROPERLY.Risk of bursting. Before starting the compressor pullthe ring on the safety valve to make sure the valvem

— 6 —EXTENSION CORDUse only three-wire extension cords that have three-prong grounding-type plugs and three-pole receptacles that accept thecompressor

— 7 —OPERATION AND MAINTENANCENOTE:The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenanc

— 8 —PRIOR TO OPERATION1. Power sourceEnsure that the power source to be utilized conformsto the power source requirements specified on theproduct na

— 9 —4. Confirm the power receptacleIf the power receptacle only loosely accepts the plug,the receptacle must be repaired. Contact the nearestelectric