Infocus IN5104 User Manual download pdf (Page 33)

Power Save: automatically turns the lamp off after no signals are

detected for 20 minutes. After 10 additional minutes with no signal, the

projector powers down. If an active signal is received before the projec-

tor powers down, the image will be displayed.

Screen Save: automatically blanks the screen after no signals are

detected for five minutes. The image returns when an active source is

detected or a remote or keypad button is pressed. Screen Save is disabled

when Power Save is enabled.

Startup Logo: allows you to display a blank Black, White, or Blue screen

instead of the default screen when no source is detected at startup. It also

allows you to capture and display a custom startup screen.

To capture a custom logo, display the image you want to capture on your

computer and select the Capture New option. From the Capture New

menu, use the Capture Position X and Capture Position Y adjustments to

frame the logo to be captured. Press Capture Start in the Capture New

menu. The projector will let you know if the capture was a success or a

failure.

The next time you start the projector, the custom logo you captured dis-

plays.

Blank Screen: determines what color is displayed when you press the

Blank button on an optional remote.

Screen Save

Startup Logo

Capture New

Blank Screen

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 50 51

No comments

Infocus IN5104 User Manual Page 33