Infocus IN5110 W59 User Manual download pdf (Page 24)

Using the remote control

The remote uses two (2) AAA batteries (not included). They are easily

installed by sliding the cover off the remote's back, aligning the + and - ends

of the batteries, sliding them into place, and then replacing the cover.

To operate, point the remote at the projection scree

n or at the projector (not

at the computer). The range of optimum operation is about 16 feet (5m). For

best results, aim the remote directly at the projector.

To use the laser pointer, press and hold the Laser button.

The laser turns off

when the button is released, or times out after two (2) minutes of continu-

ous operation.

WARNING: Do not

look into the laser beam emitted from the top of the

remote control

The remote contains four Source buttons that allow you to assign a particu-

lar input to a specific source. Simply pres

s the numbered Source buttons to

travel to whatever four sources you wish to have available.

Press the remote's Menu button to open the projector's

menu system. Use the

arrow buttons to navigate, and the Select button to select features and adjust

values in the menus.

The remote also has a power button to turn the projector on and off, vol

buttons and a mute button to control the sound, a backlight button to light

the remote's buttons in the dark, and a video and computer button to switch

between those two sources.

Two presentation-specific features are also provided. Use the blank button

to display a blank screen instead of the current slide; use the effect button to

invoke a user-definable action, such as freeze, or magnify.

The Auto Image button reacquires the computer im

age and the Presets but-

ton lets you customize the settings for each source. Up to three Preset set-

tings can be customized and saved.

backlight button

navigation buttons

LED

source buttons

laser

button

Troubleshooting the remote

• Make sure the batteries are installed in the proper orientation and are

not dead. The LED at the top of the remote lights when any button is

pressed when the battery power is adequate.

• Make sure you’re pointing the remote at the projector, not the com-

puter, and are within the remote range of 16 feet (5m).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 52 53

Comments to this Manuals

No comments

Infocus IN5110 W59 User Manual Page 24

Comments to this Manuals

Related products and manuals for Data projectors Infocus IN5110 W59