1ProjectorIN5132/IN5142/IN5134/IN5134a IN5144/IN5144a/IN5135/IN5145User's Manual (detailed) Instant Stack GuideThank you for purchasing this prod
10Installation2.4 Conrming Main and Sub settingsNOTE • When Intelligent Stack is in use, only Main will be able to receive remote control signals. Su
11Installation2.5 Fine adjusting image positionTo superimpose the images of Main (Set B) and Sub (Set A), ne adjust the im-age size and position of M
12InstallationNOTES for all users • For details on PERFECT FIT, refer to PERFECT FIT in the EASY MENU or SETUP menu as described in the Operating Guid
133.1 Displaying STACK menuUse the ▲/▼/◄/► buttons to go into the fol-lowing menu.ADVANCED MENU > OPTION > SERVICE > COMMUNICATION > STA
14STACK menu settingsNOTE • After setting Main or Sub, the setting information can be checked on Projector Web Control. (Network Guide → Projector We
15STACK menu settings3. Press the ◄ button to return to the previous menu, or press the ► button to save the setting. (19)NOTE • If DUAL is selected
16STACK menu settingsNOTE • When DUAL is selected for LAMP MODE, the images projected from the Main and Sub projectors can be different. We recommend
17STACK menu settings3. Press the ◄ button to return to the previous menu, or press the ► button to save the setting. (19)NOTE • The ALTERNATE MODE
18STACK menu settings3. Press the ◄ button to return to the previous menu, or press the ► button to save the setting. (19) NOTE • <Only for IN513
19STACK menu settingsBefore exiting menu operation for Intelligent Stack, we recommend checking all the settings in the STACK menu. For dialogs that a
2 1. Introduction ...31.1 Basic information and preparations ... 3Instant Stack ...
20STACK menu settings(continued on next page)3.7 Important information for Intelligent Stack This section provides important information related to se
21STACK menu settingsSUB on both projectors in the STACK MODE dialog, or turn both projectors off and on again.● The Main and Sub projectors share the
22STACK menu settingsExample:Cover Error: The lamp cover is open.Lamp Error: The lamp will not light up.Fan Error: There is a problem with the cooling
23To superimpose two images onto one screen, the same image must be input to the Main and Sub projectors. There are various methods to input the image
24Connecting cablesInputting the image to Sub and Main individually 1. Split the output signal from your image device into two with a device such as a
255.1 Preparing for menu operations If Simple Stack without an RS-232 connection is used, press the related source button on the remote control or pre
26Setting input ports using menu5.3 Starting up Main projector After completing section 5.2 Checking Main projector's operating status, the two p
27Setting input ports using menu5.4 Setting the menu If Intelligent Stack with RS-232 connection is used, observe the following. When inputting image
28Setting input ports using menuInputting image from Main to Sub - Video signal (either component or video)1. If the STACK menu is already displayed
29Setting input ports using menu5.4 Setting the menu - Inputting image to Sub and Main individually (continued)3. Use the ▲/▼ buttons to highlight SU
3(continued on next page)1. Introduction1.1 Basic information and preparationsInstant StackInstant Stack is a feature that allows you to easily superi
306. Restrictions on Schedule functionThis model supports the Projector Web Control Schedule function. (Network Guide → 3.1.7 Schedule Settings) Ther
31Restrictions on Schedule functionNOTE • If the Schedule is not executed, an error message will be sent in accordance with the conditions set in the
327. TroubleshootingBefore assuming that the projector needs repair, review the following trouble-shooting tips:Problems can be easily mistaken for ma
33TroubleshootingThe STACK menu is not functioning.The projectors are not set up for the Intelligent Stack feature. Check the following settings on th
4Introduction1.1 Basic information and preparations (continued)NOTICE ► Intelligent Stack can be only be used with pairs of the same model projectors.
5For safety reasons, read 1.1 Basic information and preparations (3, 4) carefully before installation. In addition, review the following for proper u
6InstallationNOTE • Set the tilt angle of Set A within 9 degrees of the level line.(continued on next page)Deciding the installation positionDecide th
7Installation4. Press the MENU button to display the menu. (Operating Guide → Using the menu function) 5. Use the ▲/▼/◄/► buttons to go into the fo
8Installation2.3 Installing the second projector (Set B) Connecting projectorsTo use Intelligent Stack, connect an RS-232 null modem cable between the
9Installation8. After pressing the ► button, a dialog to conrm whether or not to save the setting is displayed. Press the ► button to save the sett
Comments to this Manuals