Infocus X1A User Manual download pdf (Page 35)

Using the menus

To open the menus, press the Menu button on the keypad or optional

remote. (The menus automatically close after 60 seconds if no buttons are

pressed.) The Main menu appears. Use the arrow buttons to move up and

down to highlight the desired submenu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and

down arrow buttons to adjust the value, select an option using radio but-

tons, or turn the feature on or off using check boxes. Press Select to confirm

your changes. Use the arrows to navigate to another setting. When your

adjustments are complete, navigate to Previous or Exit, then press Select to

go to the previous menu; press the Menu button at any time to close the

menus.

Dots appears before the menu name. The number of dots indicate the

menu’s level, ranging from one (the Main menu) to four (the most nested

menus).

The menus are grouped by usage:

• The Picture menu provides image adjustments.

• The Settings menu provides set-up type adjustments that are not

changed often.

• The About menu provides a read-only display of information about the

projector and source.

Certain menu items may not be visible or may be grayed depending upon a

particular source being connected. For example, Sharpness is only available

for video sources and is not visible when a computer source is active. Menu

options are grayed out only if the source if selected but no signal is present.

For example, if the projector is set to a video source but the source, such as a

DVD player, is turned off video menu options are grayed out.

keypad navigation

Main menu

buttons

dots

Picture

Settings

About menu

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

No comments

Infocus X1A User Manual Page 35