Infocus IN5106 User Manual download pdf (Page 37)

Replacing the projection lamp

The lamp hour timer in the Service Info menu counts the number of hours

the lamp has been in use. Twenty hours before the specified end of the

lamp’s life, the message “Change lamp” briefly appears on the projected

screen.

NOTE: You can order new lamp housings from www.infocus.com (in select

areas), your retailer or your dealer. Only genuine InFocus lamps are tested

for use in this projector. InFocus is not liable for the performance, safety or

certification of any other lamps. The use of other lamps violates the projec-

tor warranty and voids all certification marks on this projector.

1 Turn off the projector and unplug the power cable.

2 Wait 45 minutes to allow the projector to cool thoroughly.

3 Loosen the lamp cover screw on the right side of the projector (marked

by the arrow) then slide and lift the lamp cover off.

WARNINGS:

• To avoid burns, allow the projector to cool for at least 45 minutes before

you replace the lamp.

• Only genuine InFocus lamps are tested with this projector. Use of other

lamps may cause electrical shock and fire.

• To prevent eye injury if the projector is ceiling mounted, wear protec-

tive eyewear before opening lamp door. A warning sticker is included

with the user documentation. Place this sticker on the lamp door if the

projector is mounted on the ceiling.

• Do not drop the lamp module. The glass may shatter and cause injury.

Do not touch the glass lamp screen. Fingerprints can obscure projection

sharpness.

• Be extremely careful when removing the lamp housing. In the unlikely

event that the bulb ruptures, small glass fragments may be generated.

The lamp housing is designed to contain these fragments, but use cau-

tion when removing the lamp housing. Before replacing the lamp, clean

the lamp compartment and dispose of cleaning materials. Wash hands

after lamp replacement.

Hg – Lamp contains mercury. Manage in accordance with local

disposal laws. See www.lamprecycle.org.

lamp hours

turn off and unplug

the projector

wait 45 minutes

lamp cover screw

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

No comments

Infocus IN5106 User Manual Page 37