Infocus X1 User Manual

User’s GuideInFocus Corporation27700B SW Parkway Avenue Wilsonville, Oregon 97070-92151-800-294-6400 •503-685-8888Fax: 503-685-8887http://www.infocus.

9Connecting a computer sourceRequired computer connectionsConnect one end of the computer cable (see page 14 for connecting video devices) to the dark

10Displaying a computer source image Remove the lens cap.Toggle the Power switch on the side of the projector to the On position.The LED flashes green

11Adjusting the imageAdjust the height of the projector, if necessary, by pressing the release but-ton to extend the foot. Rotate the leveling foot lo

12Using the projector with Windows 98 for the first timeThe first time you connect a computer running Windows 98 to the projector, the computer recogn

13Skip this page if you did not connect a USB mouse cableFor Windows 98:• If you connected the USB cable, the Add New Hardware Wizard appears again. D

14Connecting a video deviceYou can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers,

15Video device connectionsComposite video connectionPlug the composite video cable’s (not included) yellow connector into the video-out connector on y

16Component video connectionIf your video device has component connectors, use a Component to S-video adapter or a Component to VESA adapter (availabl

17Displaying videoRemove the lens cap.Toggle the Power switch on the side of the projector to the On position.The LED flashes green and the fans start

18Adjust the zoom and focus.If the image is not square, adjust the keystone using the buttons on the key-pad. Press the top Keystone button to reduce

This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, No

19Shutting down the projectorThe projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen

20Problem Solution Resultno start up screenplug power cord in projector’s left sideremove lens captoggle power switchcorrect imageonly start up screen

21Problem Solution Resultno computer image, just the words “Signal out of range” press the Auto Image button on keypadcomputer image projectedASignal

22Problem Solution Resultimage fuzzy or cropped set your computer’s display resolution to the native resolution of the projector (Start>Settings>

23Problem Solution Resultimage not square adjust Keystone on keypadsquare imageimage not sharpadjust Sharpness (video sources only) in the Picture>

24Problem Solution Resultimage upside downturn off ceiling in Settings>System menucorrect imageimage reversed left to rightturn off rear in Setting

25Problem Solution Resultlamp won’t turn on, LED blinking redmake sure vents aren’t blocked, turn off the projector and allow it to cool for a minute

26Still need assistance?If you need assistance, call InFocus Customer Service directly at1-800-799-9911. Support is free between 6 a.m. and 6 p.m. PST

27Using the remote controlThe remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligni

28Using the audio To use the projector’s speaker, connect your source to the Audio In connec-tor on the projector. See page 15 regarding using the aud

2Declaration of ConformityManufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USAEuropean Office: Strawinskylaan 585,

29Optimizing computer imagesAfter your computer is connected properly and the computer’s image is on the screen, you can optimize the image using the

30Optimizing video imagesAfter your video device is connected properly and the image is on the screen, you can optimize the image using the onscreen m

31Using the menusTo open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are p

32Picture menuTo adjust the following settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press Selec

33Presets: Presets are provided that optimize the projector for displaying computer presentations, photographs, film images, and video images. Film in

34Advanced menuSharpness: (video sources only) changes the clarity of the edges of a video image. Select a sharpness setting.Color Temperature: change

35Settings menuAudio: allows adjustments to Volume of the internal speaker. Adjustments can also be made from the projector’s keypad and the remote.So

36Startup Logo: allows you to display a blank screen instead of the default screen at startup, and when no source is detected. Blank Screen: determine

37Language: allows you to select a language for the onscreen display.Service: To use these features, highlight them and press Select.Factory Reset: re

38MaintenanceCleaning the Lens1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.• Avoid using an excessive amount of cleaner, and don’t

3Table of ContentsIntroduction 4Positioning the projector 5Projector and Device Connector Guide 6Computer connections 6Video connections 6Connecti

394Loosen the two captive screws that attach the lamp housing to the pro-jector.5 Detach the lamp connector from the projector by depressing the locki

40Cleaning the Lamp Housing ScreensIn dirty or dusty environments, the two dust filter screens in the lamp hous-ing can become clogged, causing high t

41AppendixSpecificationsAccessoriesTe m p e r a t u r eOperating50 to 104° F (10 to 40° C) at sea level50 to 95° F (10 to 35° C) at 10,000 feetNon-ope

42NOTE: Use only approved accessories. You can purchase these items by contacting your dealer or InFocus Catalog Sales at 1-800-660-0024 or visiting o

43Projected image sizeNOTE: Visit our website at www.infocus.com/service for an interactive image size calculator.Red LED Behavior and Projector Error

44Numerics16x9 vs 4x3 screen aspect 14800x600 resolution 4AAbout 36, 37Accessoriesoptional 42standard 41accessories, ordering 41, 42Advance menu 34alt

45projector 28keystone adjustment 11, 18Llampordering 41Lamp Housing Screenscleaning 40lamp replacement 38Lamp Reset 37Language 37LED 19blinking green

46Service 37Service Code 37Settings menu 35sharpness 34solid green 19solid red 19Sources 35Specifications 41Startup Logo 36S-video connector 15System

47Limited WarrantySubject to the Limitations, Exclusions and Disclaimers hereof, InFocus Cor-poration ("InFocus") warrants that the Projecto

48Limited Warranty PeriodThe Limited Warranty periods hereof commence on the date of purchase by the end-user customer. These Limited Warranty provisi

4IntroductionYour new digital projector is easy to connect, use, and maintain. It is an exceptional projector for both business presentations and home

User’s GuideInFocus Corporation27700B SW Parkway Avenue Wilsonville, Oregon 97070-92151-800-294-6400 •503-685-8888Fax: 503-685-8887http://www.infocus.

5Positioning the projectorTo determine where to position the projector, consider the size and shape of your screen, the location of your power outlets

6Projector and Device Connector GuideThe following should help you find the connectors that you want to use to obtain the best resolution possible fro

7Video Device Video CompatibilityIf Your Device Connector IsAttach to this Labeled Connector on ProjectorComments For Setup Instructions, seeStandard

8Video DeviceVideo CompatibilityIf Your Device Connector IsAttach to this Labeled Connector on ProjectorComments For Setup Instructions, see HDTV(High