Infocus RealCam PTZ User Manual download pdf (Page 19)

Serial Communication Control

In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface.

The parameters of RS232C are as follows:

Baud rate: 2400/4800/9600 bit/s.

Start bit: 1 bit.

Data bit: 8 bits.

Stop bit: 1bit.

Parity bit: none.

Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the

process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be

called up after initialization) Then the users can control the camera with commands in the command list.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 38 39

No comments

Infocus RealCam PTZ User Manual Page 19