Infocus IN2128HDA User's Guide download pdf (Page 13)

Shutting down the projector

Auto Off Time

The projector also has an Auto Off Time feature that automatically turns the projector off

after no active sources are detected and no user interaction with the projector is performed

for 30 minutes. By default, this feature is off. You can change the length of time, see page 30.

Turning off the projector

To turn the projector off, press the Power button on the remote or keypad. The lamp turns

off and the Power LED blinks blue for 30 seconds while the fans continue to run to cool the

lamp. If the Power Saving Mode feature is on and when the lamp has cooled, the LED lights

blue and the fans stop. If the Power Saving Mode feature is off and when the lamp has cooled,

the LED blinks blue and the fans stop. Unplug the power cable to completely power off the

projector.

Troubleshooting your setup

If your image appears correctly on the screen, skip to the next section. If it does not,

troubleshoot the setup.

The Status Indicator Lights on top of the projector indicates the state of the projector and

can help you troubleshoot

Table 2: Indicator Lights

Status Indicator Light Meaning

POWER: Solid Blue

TEMP: Off

LAMP: Off

POWER: Blinking Blue

TEMP: Off

LAMP: Off

1. If the Power Saving Mode feature is on,

the projector is plugged in.

2. The projector is on and initialized.

3. The projector is in normal operation.

1. If the Power Saving Mode is off, the

projector is plugged in.

2. The projector is powering down and

the fans are cooling the projector.

POWER: Blinking blue

TEMP: Blinking red

LAMP: Blinking red

POWER: Solid blue

TEMP: Blinking red

LAMP: Blinking red

The projector fan(s) are not operating

correctly and the projector has been shut

down.

The lamp failed to ignite.

Contact Technical Support if the problem

persists. Visit www.infocus.com/support

to contact service.

POWER: Solid blue

TEMP: Blinking red

LAMP: Blinking red

The lamp has reached its end of life and

must be replaced. The lamp will continue

to operate until it fails.

Contact Technical Support. Repair may be

needed.

POWER: Solid blue

TEMP: Blinking red

LAMP: Off

1. The projector is overheating and the

lamp will be shut off. The fans will

continue to run.

2. The projector will not turn back on

until the cooling process is complete.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 61 62

Comments to this Manuals

No comments

Infocus IN2128HDA User's Guide Page 13

Comments to this Manuals

Related products and manuals for Data projectors Infocus IN2128HDA