Infocus IN3124 Specifications download pdf (Page 28)

Advanced Menu

Image

Setup

Status/Service

Basic Menu

3D Control...

Color...

PC...

Video...

(

Advanced Menu

)

MDL: IN3124

FW: 1.02

Advanced Menu

Image:

3D Control:

3D Control: allows you to enjoy 3D (stereoscopic) content. Your projector

supports two synchronization modes (External Sync and DLP Link™) for con-

trolling LCD shutter glasses. In addition to the projector, you will need a pair

of 3D shutter glasses, 3D content, and 3D compatible source (and emitter).

Ensure the glasses you choose are consistent with the synchronization mode

you will be using.

3D Sync Invert: (Only applies when 3D control is set to DLP Link™.) If the

image appears to flutter, look odd or if the image depth looks off or you expe-

rience eye strain, turn this feature on to see if the image improves.

Color...

Color:

adjusts a video image from black and white to fully saturated color. The

color setting applies to video sources only.

Red/Green/Blue Gain:

adjusts the gain of the red, green or blue channel of the

image.

Red/Green/Blue Offset: adjusts the of

fset of the red, green or blue channel of

the image.

Color Space: applies to computer and component video sources. It allows you

to select a color space that has been specifically tuned for the input signal.

When Auto is selected, the projector automatically determines the standard. To

choose a different setting, turn off Auto, then choose RGB for computer

sources or choose either REC709 or REC601 for component video sources.

Color Temp: changes the intensity of the colors. Select a listed relative

warmth value.

Gamma: sel

ect the appropriate gamma from among Video, Film, Bright, and

CRT.

Tint:

adjusts the red-green color balance in the image of NTSC video images.

The tint setting applies to NTSC video sources only.

White Intensity: increases

the brightness of whites that are near 100%.

PC:

Force Wide: when this is off, the analog locking algorithms choose the stan-

dard mode resolution (4:3) as the preferred

default resolution. When this is on,

the analog locking algorithms choose wide mode resolution (16:10) as the pre-

ferred default resolution.

Phase:

adjusts the horizontal phase of a computer source.

Prevent PC Screen Saver: p

revents your computer from going into Screen

Save mode. The projector must be connected to the PC via a USB cable for

this feature to work.

Sync Threshold: (progressive signals

only) If a hardware device, such as a

DVD player, is not syncing properly with the projector, select this option to

help it to sync when connected to the projector.

Tracking: adjusts the

vertical scan of a computer source.

Horz/Vert Position: adjusts

the position of a computer source.

Video:

Detect Film:

determines whether the original source of the input video was

film (progressive) or video (interlaced).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 45 46

Comments to this Manuals

No comments

Infocus IN3124 Specifications Page 28

Comments to this Manuals

Related products and manuals for Data projectors Infocus IN3124