search

Infocus IN3124 Specifications Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 30
Wired LAN
Wireless LAN
Restart Network...
Previous
( Network )
MDL: IN3124
FW: 1.02
Network Menu
29
Network
Allow you to configure the network settings.
Wired LAN
DHCP: Abbrev
iation for Dynamic Host Configuration Protocol. This
protocol automatically assigns IP Addresses to networked devices.
• When the “DHCP” is set to “On”, the DHCP server will assign an
IP address to the projector automatically. This may take up to a
minute.
• When the "DHCP" is set to "Off", the user will need to set the IP
address manually.
IP Address: The
numerical address used to identify devices on the net-
work. This is only accessible when DHCP
is set to Off.
• The IP Address is the number that ide
ntifies this projector on the
network. You cannot have two devices with the same IP Address on
the same network.
• The IP Address “0.0.0.0” is prohibited.
Subnet Mask: A numeric value d
efining the number of bits used in an IP
Address when the network is divided into subnets. This function can only
be used when DHCP is set to Off.
• The Subnet Mask “0.0.0.0” is prohibited.
Default Gateway: A
server (or router) to communicate across networks
(subnets) that are divided by a Subnet Mask. This function can only be
used when DHCP is set to Off.
DNS: Setup DNS server
address when DHCP is disabled.
Mac Address: Abbreviation for Media Access Control Address. A Mac
Address is a unique ID number assigned to each network adapter.
Apply: Save an
d execute the wired network settings.
Wireless LAN
SSID:
Display the projector’s SSID information.
IP Address: a read-only display of IP Address.
Subnet Mask
: a read-only display of Subnet Mask.
Restart Network...: Restart network settings.
Status/Service:
Source Info: a read-only display of current source settings.
Projector Info: a read-only
display of current projector settings.
Reset Lamp Hours...:
resets the lamp hours used counter in the Projector Info
menu to zero. Do this only after changing the lamp.
Factory Reset...: restor
es all settings to their factory default settings.
Service Code...:
only used by authorized service personnel.
Network Info: a read-only
display of current network settings
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Comments to this Manuals

No comments
Related products and manuals for Data projectors Infocus IN3124
Data projectors Infocus IN122 Specifications   (36 pages)
Data projectors Infocus IN5316HD Manual  (61 pages)
Data projectors Infocus IN3926 Specifications   (51 pages)
Data projectors Infocus IN5314 Manual   (64 pages)
Data projectors Infocus IN2126 Manual   (40 pages)
Data projectors Infocus IN114ST Manual   (35 pages)
Data projectors Infocus IN5312 User Manual   (64 pages)
Data projectors Infocus IN35 Instruction Manual    (8 pages)
Data projectors Infocus X6 User's Guide   (37 pages)
Data projectors Infocus IN5535L Specifications   (4 pages)
Data projectors Infocus IN1112 Specifications   (8 pages)
Data projectors Infocus IN8601 Manual   (53 pages)
Data projectors Infocus IN3916 Specifications   (42 pages)
Data projectors Infocus IN5122 User Manual   (97 pages)
Data projectors Infocus LP70+ User's Guide   (67 pages)
Data projectors Infocus IN24 User's Guide   (8 pages)
  • Gas-Fired Products Triangle Hubbell TayMac Ernesto Comfort
  • Sharp Holders Honeywell Fireplaces Behringer Digital pianos Kenmore Elite Electric laundry dryers Profoto Supplementary music equipment
  • Sony ICD-B200 Behringer X V-AMP LX1-X Acer TravelMate 8200 Cuisinart CPT-65 Acer H9505BD
  • AEG KM8403101M User Manual Ge CS980STSS User Manual Dell PowerVault MD3800f User Manual Pioneer CD-HF1 User Manual