Infocus in32 in34 User Manual download pdf (Page 4)

1 Connect the power cord to the projector

and to an electrical outlet

2 Turn on the projector

3 Wait for the lamp to warm up

4 Turn on computer or other source

5 Change source if needed

The power light on the projector will light amber.

Press power (on the projector or remote).

The power light will start blinking green.

After a few seconds, the power light will stop blinking and turn

green. It can take a minute for the lamp to reach full brightness.

If needed, press source (on the projector or remote) to view the

source. You may have to press it more than once.

You may need to press a specific key combination to activate

your laptop's external video port. On most laptops, hold down

the FN key while pressing a key labeled CRT/LCD, LCD/VGA,

a monitor icon , or similar. Key combos for popular models:

Warning: Do not look directly into the lens

when the projector is turned on.

Important: If there is still no video, restart your

computer (first make sure it's connected to the

projector and the projector is turned on).

5-10 sec.

Apple F7

Dell Fn+F8

Fujitsu Fn+F10

IBM ThinkPad Fn+F7

Toshiba Fn+F5

Gateway Fn+F3 or Fn+F4

HP/Compaq Fn+F4 or Fn+F6

Sony Fn+F7

source

Turn on projector and source

1 2 3 4 5 6 7 8

No comments

Infocus in32 in34 User Manual Page 4