Infocus SP1080 User Manual download pdf (Page 29)

Lamp...

Programmed Dimming: When enabled, Programmed Dimming enhances con-

trast ratios in dark scenes and disables Lamp Low Power. Programmed Dim-

ming will impact lamp life and system noise performance. Programmed

Dimming works in conjunction with the lamp. If Lamp Low Power is enabled,

Programmed Dimming is unavailable.

Lamp Low Power: toggles between on and off. Turn it on to lower the light

output of the lamp. This also lowers the fan speed, making the projector qui-

eter.

OSD Setup...

Language: allows you to select a language for the onscreen display.

Menu Position: allows you to change the position of the On Screen Display

items.

Menu Transparency: allows you to change how much of the projected image

behind the menu you can see. As the value increases, more of the image

behind the menu is visible.

Show Messages: displays status messages (such as “Searching”) in the lower-

left corner of the screen.

PIN Settings

PIN Protect: The PIN (personal identification number) feature allows you to

password protect your projector. Once you enable the PIN feature, you must

enter the PIN before you can project an image. Use the Up/Down/Left/Right

arrows buttons on the remote or keypad to set a 4-button press sequence. If

you enter an incorrect PIN 3 times in succession, the projector will automati

cally shut down. If you lose or forget your custom PIN, contact InFocus Tech-

nical Support.

To enter the PIN at projector startup:

Power up the projector. The “Enter PIN” dialog box appears after the startup

screen. Enter the default PIN (Left/Right/Up/Down) or the new PIN if it has

been changed, using the arrow buttons on the remote or keypad. See the

description above for instructions.

To change the PIN:

Select “Change PIN...” in the Advanced Menu > Setup > PIN settings menu.

Enter the existing PIN. Enter the new PIN twice. Do not forget the new PIN.

Contact InFocus Support to recover a projector with a forgotten PIN.

Power

Power Saving Mode: When the Power Saving Mode is On and the projector is

in standby (powered off but connected to AC power), external audio will not

work.

AC Power On: When this feature is enabled, the projector automatically

turns on when power is connected. This allows control of ceiling mounted

projectors with a wall power switch.

Instant Power On: When this feature is enabled and it has been less than 1

minute since the projector was powered down, you can turn the projector

back on immediately. When this feature is disabled, you will need to wait for

the projector lamp to completely cool before restarting the projector.

Eco Blanking: When this feature is enabled and no video source is sensed,

70% of lamp power is saved and no image is shown. When the video source is

again applied, the image is shown immediately.

Source

Auto Source: When this feature is On, the projector automatically finds the

active source, checking the selected Power-up Source first. When this feature

is Off, the projector defaults to the source selected in Power-up Source. To

display another source, you must manually select one by pressing the Source

button on the remote or keypad and selecting one from the displayed Source

menu.

Power-up Source: determines which source the projector checks first for

active video during power-up.

Search Screen: allows you to display a blank screen instead of the default

screen at startup, and when no source is detected.

1 ... 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Infocus SP1080 User Manual Page 29

Comments to this Manuals