Infocus PRJ-LIFT-UNIV Installation Manual download pdf (Page 6)

SL220 Installation Instructions

PREPARING FOR INSTALLATION

Installation Requirements

The SL220 has been designed to be mounted recessed into a

suspended ceiling consisting of 2’ x 2’ ceiling tiles and secured

by a WireVice system.

Electrical Rating

100-250VAC~, 50/60Hz, 960W

North America: 120VAC, 60Hz, 8A

IMPORTANT ! : Installation and maintenance of this product

must be completed by a qualified service technician.

Preparing SL220 Framework

NOTE: Addition of the vertical bracket (C) is optional. The

vertical bracket is used to allow vertical adjustment into

the ceiling if a ceiling tile is attached to the bottom of the

SL220.

1. OPTIONAL: Attach vertical brackets (C) to both sides (in

each corner) of the SL220 frame (B) using a 06-32 x 5/16"

Phillips flat head screw (F). (See Figure 1)

2. Attach horizontal bracket (D) over the vertical bracket (C) at

each corner of the SL220 frame using a 06-32 x 1/2" Phillips

flat head screw (E). (See Figure 1)

Figure 1

Installing SL220 Framework

1. Remove one 2 ft x 2 ft tile from ceiling.

2. Insert SL220 frame (B) with attached brackets into the

empty ceiling space. (See Figure 2)

3. Set SL220 frame over top of ceiling framework, hooking

each horizontal bracket (D) onto the ceiling framework.

(See Figure 3)

4. Secure SL220 frame (B) to ceiling framework using one

10-24 x 1/2" Phillips head screw (K) through each horizontal

bracket (D) at each corner. (See Figure 3)

Figure 2

Figure 3

(B)

(C)

(D)

Ceiling

Framework

(B)

Ceiling

Framework

(D)

(K) x 4

(B)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Infocus PRJ-LIFT-UNIV Installation Manual Page 6

Comments to this Manuals