Infocus DISPLAY LINK W3902 User Manual download pdf (Page 6)

Turn off the projector

READ THE REFERENCE GUIDE

Download it at www.infocus.com/support

The Reference Guide is available in multiple languages. It covers advanced setup and

operation, including using the projector menus, using the remote to control presentations,

using LAN/network functions, and lamp replacement instructions.

Press the power button

The power light on the projector will blink while the fan cools the

lamp. If you need to unplug the projector, wait until the fan stops and

the power light stops blinking and stays on.

Note:

While the power

light is blinking, button presses on the projector and remote are

ignored.

Optional: Use LiteBoard wand

The wand works with computer sources only

Charge the wand’s battery

Connect the USB power adapter to an electrical outlet, then connect a USB cable

between the adapter and the wand. Unplug the cable when the light turns off.

Connect the computer and projector with USB

Connect the other USB cable between your computer and the projector’s DisplayLink

connector (see step ).

Note:

You don’t need to install DisplayLink software to use

the wand.

Turn on the wand

Press the wand’s tip, or press its L or R button (the light will blink).

Use the wand as a wireless mouse

To move:

Point the wand at the screen.

To click:

Push the wand’s tip onto the screen, or click the L button.

Avoid shadows!

The wand won’t work if its tip is in a shadow, or if it is pointing at a shadow.

For detailed instructions and troubleshooting,

download the Reference Guide (see below).

Lithium battery caution:

The LiteBoard wand lithium battery is only rechargeable, and is not user serviceable or user

replaceable. Always use the included USB cable and power adapter (or your computer) to charge the wand.

USB connector

behind ﬂap

1 2 3 4 5 6 7 8

No comments

Infocus DISPLAY LINK W3902 User Manual Page 6