Infocus DISPLAY LINK IN3902LB User Manual download pdf (Page 19)

Shutting down the projector

The projector automatically displays a black screen after no active source is

detected for 30 minutes. This black screen helps preserve the life of the

projector. The image returns when an active source is detected or a remote

or keypad button is pressed.

Screen Save Time

You can make the black screen appear after a preset number of minutes by

turning on the Screen Save Time feature in the Setup menu (on page 34).

Auto Off Time

The projector also has an Auto Off Time feature that automatically turns the

projector off after no active sources are detected and no user interaction

with the projector is performed for 30 minutes. By default, this feature is off.

You can also change the length of time (on page 34).

Turning off the projector

To turn the projector off, press the Power button on the remote or keypad.

The lamp turns off and the LED blinks amber for 1 minute while the fans

continue to run to cool the lamp. When the lamp has cooled, the LED lights

amber and the fans stop. Unplug the power cable to completely power off

the projector.

Troubleshooting your setup

If your image appears correctly on the screen, skip to the next section. If it

does not, troubleshoot the setup.

The Status Indicator Panel on top of the projector indicates the state of the

projector and can help you troubleshoot.

Table 3: Status indicator light behavior and meaning

Icon Meaning

Power, solid amber

Power, blinking green

Power, solid green

Power, blinking amber

The projector is plugged in.

The power button has been pressed and

the so

ftware is initializing.

The projector is on and initialized.

The power button has been pressed to

turn

the projector off and the fans are

running to cool the projector.

Temperature The projector is too hot. Make sure the

vents aren’t blocked (on page 24). Turn

off the projector and wait one minute,

then

turn the projector on again. Contact

Technical Support if the problem persists.

Visit www.infocus.com/support to contact

service.

Lamp Turn off the projector and wait one

inute, then turn the projector on again.

If the lamp light turns on again, replace the

lamp and reset the lamp timer.

Wrench/Service Turn off the projector and wait one

inute, then turn the projector on again.

If the service lamp turns on again, service

is required. Visit www.infocus.com/

support to contact service.

1 ... 18 19 20 ... 51

Comments to this Manuals

No comments

Infocus DISPLAY LINK IN3902LB User Manual Page 19

Comments to this Manuals

Related products and manuals for Projectors Infocus DISPLAY LINK IN3902LB