Infocus Play Big IN82 User Manual download pdf (Page 27)

Service: To use these features, highlight them and press Select.

Factory Reset: restores all settings to their default.

Reset Lamp hours: resets the lamp hours used counter in the Service Info

menu to zero. Do this only after changing the lamp.

Te s t P a t t e r n : displays a test pattern. To display test patterns, first you must

assign Blank Screen to the Custom key (page 25), then click the Test pattern

check box in the Service menu to turn the option on, exit the menus, then

press the Custom button on the remote. To select the patterns, use the up/

down arrows on the remote. To exit the test patterns, press the Custom

button.

Blue Only: turns off the Red and Green portions of the input, allowing you

to properly adjust the color balance with a SMPTE color bar pattern.

HDMI DDC: turns the EDID extension on and off. Some graphic cards can-

not recognize the projector’s EDID. By default, the extensions are on (check-

boxes are checked). Change these settings if you have trouble using HDMI or

DVI sources.

Serial Port: allows you to select the baud rate to accommodate some older,

slower external control systems.

Service Info: provides information about the projector’s software, serial

number, and lamp.

Service Code: only used by authorized service personnel.

Source Info: provides information about the active source.

Service menu

HDMI menu

Serial Port menu

Service Info

Source Info menu

K1 RG.fm Page 26 Thursday, November 8, 2007 9:08 AM

1 ... 26 27 28 ... 39

No comments

Infocus Play Big IN82 User Manual Page 27