Infocus Play Big IN82 User Manual download pdf (Page 28)

Maintenance

Replacing the projection lamp

The lamp hours timer in the Service Info menu counts the number of hours the

lamp has been in use. Twenty hours before the lamp life expires, a message appears

on the screen at startup indicating that you should change the lamp. The LED on

top of the projector also blinks red twice to indicate that the lamp should be

changed.

NOTE: You can order new lamp housings from www.infocus.com (in select areas),

your retailer or your dealer. Use only a replacement lamp with the same type and

rating as the original lamp.

WARNING:

To avoid burns, allow the projector to cool for at least 60 minutes before

you replace the lamp.

Be extremely careful when removing the lamp housing. In the unlikely

event that the bulb ruptures, small glass fragments may be generated. The

lamp housing is designed to contain these fragments, but use caution when

removing the lamp housing. Before replacing the lamp, clean the lamp

compartment and dispose of cleaning materials. Wash hands after lamp

replacement.

Hg – Lamp contains mercury. Manage in accordance with local dis-

posal laws. See www.lamprecycle.org.

Turn off the projector and unplug the power cord. If ceiling mounted, discon-

nect all cables and detach the projector from the ceiling mount.

2 Wait 60 minutes to allow the projector to cool thoroughly.

3 Turn the projector upside down on a soft cloth so that the lamp door is facing

you. Remove the base or ceiling mount plate, if attached.

Lamp hours used

wait 60 minutes

turn off and unplug

projector

K1 RG.fm Page 27 Thursday, November 8, 2007 9:08 AM

1 ... 27 28 29 ... 39

No comments

Infocus Play Big IN82 User Manual Page 28