Infocus Play Big IN82 User Manual download pdf (Page 5)

Connector Panel

Remove the cable cover, if attached, to access the connector panel. Replace the

cover after the projector is installed, if desired.

The projector provides the following connection options:

• M1-DA/DVI (Digital Visual Interface)

• HDMI™ (High Definition Multimedia Interface)

• Component (RCA)

•S-video

• Composite video (RCA)

See “Video connectors” on page 7 for details.

The projector also provides the following connectors:

• RS-232 for serial control

• Two 12 volt DC outputs (see below)

• IR input for connection to Niles/Xantech compatible IR repeater systems

12 volt DC outputs

The 3.5mm mini-jack triggers provide a 12 volt, 0.25 amp DC output. They provide

a constant output while the projector is on. They are typically used for screen con-

trol. For example, if you connect your projection screen to the vertical screen trig-

ger with the cable that came with your screen, when you turn on the projector the

screen will move down; when you turn the projector off, the screen will return to

the storage position. The horizontal screen trigger output can be used to control

curtains or an adjustable aspect ratio screen.

M1-DA/

S-video

component

composite

HDMI

RS-232

DVI

RCA

IR input

RCA

12 volt DC output

+12v

ground

3.5mm plug

to, for example, screen relay (see screen manufacturer

for details)

K1 RG.fm Page 4 Thursday, November 8, 2007 9:08 AM

1 2 3 4 5 6 ... 39

No comments

Infocus Play Big IN82 User Manual Page 5