Infocus IN5122 User Manual download pdf (Page 16)

Connecting to a power supply

Plug the power cord into the projector's AC

IN (AC inlet) port.

Firmly plug the power cord’s plug into the

outlet. A few seconds after connecting the

power supply, the POWER indicator will light

steady orange.

►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to get a new one.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily available.

Remove the power cord for complete separation.

• Never modify the power cord.

WARNING

Using the security bar and slot

AC IN

Power

cord

A commercially available anti-theft chain

or wire can be attached to the security bar

on the projector. Refer to the illustration to

choose an anti-theft chain or wire.

This product also has a security slot for a

Kensington lock.

For details, refer to the security tool manual.

►Do not use the security bar and slot to prevent the projector

from falling down, since it is was not designed for this purpose.

WARNING

►Do not place the anti-theft chain or wire near the exhaust

vents. It may become too hot.

CAUTION

• The security bar and slot will not prevent theft by themselves. They

should be used as supplemental theft prevention measures.

NOTE

Security slot

Anti-theft chain or wire

Please remember that when the AC POWER

ON feature is activated (49), the power supply

connection will turn the projector on.

Setting up

security bar

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 96 97

Comments to this Manuals

No comments

Infocus IN5122 User Manual Page 16

Comments to this Manuals

Related products and manuals for Data projectors Infocus IN5122