Infocus IN5122 User Manual download pdf (Page 66)

SECURITY menu

This projector is equipped with security features.

From the SECURITY menu, items shown in the table

below can be performed.

To use the SECURITY menu, the user must use a

password rst.

Enter the SECURITY menu

1. Press the ► button. The SELECT PASSWORD box will display.

2. Use the ▲/▼/◄/► buttons to enter the correct password. The

factory default password is as follows.

IN5122: 4102

IN5124: 2502

This password can be changed

(



below)

. Move the cursor to the

right side of the SELECT PASSWORD box and press the ► button to

display the SECURITY menu.

• It is highly recommended that the factory default password be

changed as soon as possible.

• If an incorrect password is input, the SELECT PASSWORD box

will display again. If the password is incorrectly input 3 times, the

projector will turn off. After that, the projector will turn off every time

an incorrect password is input.

3. Items shown in the table below can be performed.

If you have forgotten your password

(1) When the SELECT PASSWORD box is displayed, press and hold

the SOURCE button for 3 seconds when pressing the ► button on

the projector.

(2) A 10 digit Inquiring Code will display. Contact your dealer with the

10 digit Inquiring Code. Your password will be sent after your user

registration information is conrmed.

• If the Inquiring Code is displayed and there is no key input within approximately 55 seconds, the

menu will close. If necessary, repeat the process from step (1) above.

Item Description

SECURITY

PASSWORD

CHANGE

(1) Use the ▲/▼ buttons on the SECURITY menu

to select SECURITY PASSWORD CHANGE

and press the ► button to display the ENTER

NEW PASSWORD box.

(2) Use the ▲/▼/◄/► buttons to enter the new password.

(3) Move the cursor to the right side of the

ENTER NEW PASSWORD box and press the

► button to display the NEW PASSWORD

AGAIN box, re-enter the same password.

(4)

Move the cursor to the right side of the NEW

PASSWORD AGAIN box and press the ►

button and the NOTE NEW PASSWORD box

will display for about 30 seconds, Write the

password down at this time.

Pressing the SELECT button on the remote control or

►

button on the

projector will close the NOTE NEW PASSWORD message.

• Please do not forget your password.

SECURITY menu

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 96 97

Comments to this Manuals

No comments

Infocus IN5122 User Manual Page 66

Comments to this Manuals

Related products and manuals for Data projectors Infocus IN5122