Infocus IN5122 User Manual download pdf (Page 24)

Operating

Press the AUTO IMAGE button on the remote control.

Pressing this button performs the following.

Using the automatic adjustment feature

 For a computer signal

The vertical position, the horizontal position and the horizontal

phase will be automatically adjusted.

Make sure that the application window is set to its maximum size

prior to attempting to use this feature. A dark image may still be

incorrectly adjusted. Use a bright image when adjusting.



For a video signal and S-video signal

The video standard best suited for the respective input signal will be selected

automatically. This feature is available only when AUTO is the selected VIDEO

STANDARD in the INPUT menu (

37).

The vertical and horizontal position will

be automatically set to the default.

● The automatic adjustment operation requires approximately 10 seconds. Also

please note that it may not function correctly with some inputs.

● When this feature is performed for a video signal, certain items (e.g. a line) may

appear outside an image.

● When this feature is performed for a computer signal, a black frame may be

displayed on the edge of the screen, depending on the PC model.

●

The items adjusted by this feature may vary when FINE or DISABLE is selected for

the AUTO IMAGE feature in the OPTION>SERVICE menu (

52).

AUTO

IMAGE button

 For a component video signal

The vertical and horizontal position will be automatically set to the default. The

horizontal phase will be automatically adjusted.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 96 97

No comments

Infocus IN5122 User Manual Page 24