Infocus C170 User Manual download pdf (Page 12)

Adjusting the image

Adjust the height of the projector, if necessary, by pressing the release but-

ton to extend the elevator foot.

Rotate the leveling foot (located at the bottom back right corner), if neces-

sary.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen.

See page 44 for a table listing screen sizes and distances.

Adjust the zoom or focus rings by rotating them until the desired image size

and focus are produced.

The projector has an Auto Keystone option that is turned on by default. But

if the image is not square, adjust the vertical digital keystone by using the

buttons on the keypad. Press the upper Keystone button to reduce the

upper part of the image, and press the lower Keystone button to reduce the

lower part.

You can also adjust the keystone via the menus, or turn off Auto Keystone.

See page 31.

Adjust the Contrast or Brightness in the Picture menu.

See page 30 for help with the menus.

adjust height

rotate

leveling

foot

elevator

foot

ease

utton

adjust distance

adjust zoom and focus

focus

zoom

adjust keystone

adjust Contrast or Brightness

contrast

brightness

1 ... 11 12 13 ... 51

No comments

Infocus C170 User Manual Page 12