Infocus C170 User Manual download pdf (Page 30)

Using the menus

To open the menus, press the Menu button on the keypad or remote. (The

menus automatically close after 60 seconds if no buttons are pressed.) The

Main menu appears. Use the arrow buttons to move up and down to high-

light the desired submenu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and

down arrow buttons to adjust the value, select an option using radio but-

tons, or turn the feature on or off using check boxes. Press Select to confirm

your changes. Use the arrows to navigate to another setting. When your

adjustments are complete, navigate to Exit, then press Select to go to the

previous menu; press the Menu button at any time to close the menus.

Dots appear before the menu name. The number of dots indicate the menu’s

level, ranging from one (the Main menu) to four (the most nested menus).

The menus are grouped by usage:

• The Picture menu provides image adjustments.

• The Settings menu provides set-up type adjustments that are not

changed often.

• The About menu provides a read-only display of information about the

projector and source.

Certain menu items may be grayed out until a particular source is con-

nected. For example, Sharpness is only available for video sources and will

be hidden when a computer source is active. Other menu items may be

grayed out when they are not available. For example, Brightness is grayed

out until an image is active.

Keypad navigation

buttons

Main menu

button

Picture

Settings

Dots

About menu

1 ... 29 30 31 ... 51

No comments

Infocus C170 User Manual Page 30