Infocus C170 User Manual download pdf (Page 13)

Connecting a video device

Standard video connections

Plug the video cable into the video-out connector on the video device. Plug

the other yellow connector into the yellow Video 2 connector on the projec-

tor.

Plug the white connector of the audio adapter into the left audio out con-

nector on the video device and plug the red connector into the right audio

out connector on the video device.

Plug the audio cable into the other end of the audio cable adapter and into

the audio in connector on the projector.

Connect the black power cable to the connector on the back of the projector

and to your electrical outlet.

NOTE: Always use the power cable that shipped with the projector.

Optional video connections

If the video device uses a round, four-prong S-video connector, plug an

S-video cable (sold separately) into the S-video connector on the video

device and into the S-Video 1 connector on the projector. Use the audio con-

nectors as described directly above.

To connect a progressive scan EDTV or HD source, use the Component to

M1 adapter (sold separately).

connect video and audio cables

connect power cable

connect S-video and audio cables

1 ... 12 13 14 ... 51

No comments

Infocus C170 User Manual Page 13