Infocus 760 User Manual download pdf (Page 27)

Using the LitePro 760

18 LitePro 760 User’s Guide

Adjusting the Height

Your LitePro is equipped with a self-locking, quick-release elevator

foot. If the projected image seems wider at the bottom than at the top,

extend the elevator foot until the distortion is corrected.

To raise the LitePro:

Raise the front of the projector off the table by lifting up on the

handle.

Press the quick-release button (just inside the handle). The eleva-

tor foot releases.

Gently lift or lower the projector to the desired height. When you

release the handle, the elevator foot locks into position.

To more closely adjust the projector’s height, rotate the elevator

foot clockwise to raise the projector. Rotate it counterclockwise to

lower the projector.

To lower the elevator foot:

• Holding the LitePro handle, press the elevator’s quick release

button. Push the elevator back up into the projector.

Always hold the LitePro’s handle when you press the

elevator’s quick release button.

Osprey.bk Page 18 Monday, December 11, 2000 1:38 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 62 63

No comments

Infocus 760 User Manual Page 27